HOW TO USE A FLAT BACK STUDS.

THREADLESS FLAT BACK STUDS INCLUDE TWO PIECES. A HOLLOW POST AND AN INSERT PIN. 

PLACE THE PIN PARTWAY INTO THE POST.

BEND THE PIN SLIGHTY BY PUSHING DOWN ON THE PIN, MAKE SURE TO PUT PRESSURE ONTO THE POST INSTEAD OF THE EARRING FRONT. THE MORE BENT THE FRONT IS, THE TIGHTER THE FIT.

PUSH THE INSERT PIECE IN THE REST OF THE WAY UNTIL IT LOCKS IN PLACE. PULL APART BOTH ENDS TO REMOVE.

IF THE JEWELRY IS TOO TIGHT, TRY A SLIGHT TWISTING MOTION WHILE YOU PULL THE END.

 

WHAT YOU NEED TO KNOW ABOUT POST LENGTHS.

CHOOSE YOUR POST LENGTH BASED ON THE PIERCING LOCATION AND YOUR ANATOMY.

6MM LENGTHS ARE TYPICALLY USED FOR HEALED PIERCINGS.

8 MM LENGTHS ARE TYPICALLY USED FOR FRESHLY PIERCED EARS OR THICKER EARS.